If you’re looking for how to reset Honeywell thermostats, the first thing to know is that they don’t have a reset button. Every reset is done with the buttons or the menu on the screen, and the steps change from one model to another.
There’s also more than one kind of reset. A restart keeps all your settings and solves many small problems. A factory reset erases everything, including the setup your heating and cooling system depends on, so it should be the last resort.
This guide covers each model family, with the steps from Honeywell’s own support pages and manuals. If you have a Nest instead, see our guide on how to reset a Nest thermostat.
Quick Answer
- Restart (every model): pull the thermostat off its wall plate for 30 seconds, and take the batteries out if it has them. Your settings stay.
- T5, T5+ and T6 Pro Smart: press and hold Menu, go to Reset, then select Factory Reset.
- T9: press Menu, then Advanced Setup, Reset and Factory Reset.
- X7S and X8S: touch Menu, then Advanced setup, Reset and Factory Reset.
- Models without Wi-Fi (T4 Pro, T6 Pro, RTH2300 and similar): Honeywell’s manuals don’t include a factory reset. You restart them, and you change their settings in the installer setup.
Restart Your Thermostat First
A restart is the safest Honeywell thermostat reset, and it’s often enough when the screen is frozen, a button doesn’t respond or the thermostat shows offline in the app.
- Wi-Fi models: pull the thermostat straight off its wall plate, wait 30 seconds and push it back on. Give it about two minutes to reconnect to Wi-Fi.
- Battery models: take the batteries out, wait 30 seconds and put them back in. If the thermostat is also wired to a C wire, pull it off the wall plate too.
You won’t lose your settings. Honeywell’s manuals say that settings are permanently stored in memory and don’t need battery power. On some models you only have to set the clock again if the batteries were out for more than two minutes. If the batteries are old, replace them now: our guide on how to change the battery in a Honeywell thermostat has the steps for each model.
You may have read that putting the batteries in backwards for a few seconds resets an older thermostat. Honeywell only describes this step for four older models (the CT3200, CT3300, T8112 and T8132), to clear a low battery message that stays on after you install new batteries. We don’t recommend it on any other model.
Which Honeywell Thermostat Reset You Need
Wi-Fi models have several reset options in the same menu. Choose the one that matches your problem, because each one erases something different:
- Wi-Fi reset. Use it when you have a new router or a new Wi-Fi password. It only removes the network, and you connect again from the app (our guide on how to connect a Honeywell thermostat to Wi-Fi has the steps for each model).
- Schedule reset. It replaces your schedule with the default energy-saving one. It’s useful when the schedule has too many changes and you want to start again.
- HomeKit or Matter reset. It removes the connection to Apple Home (or to any Matter app), so you can pair the thermostat again.
- Factory reset. It erases everything: the schedule, the Wi-Fi connection and the system setup. Use it when you move out, when the thermostat was set up for the wrong type of system, or when nothing else has worked.

Before a factory reset, do three things:
- Write down the model number. It’s printed on the back of the thermostat and starts with letters like TH, RTH, RCHT or T.
- Take a photo of the wires. After the reset, the thermostat asks again what kind of system you have (furnace or heat pump, and how many stages). A wrong answer can make your heating or cooling run incorrectly. Our thermostat wiring guide explains what each wire tells you.
- Have your Wi-Fi password and your app login ready. You’ll need both to connect the thermostat again.
How to Reset Honeywell Thermostats by Model
The table shows how to reset Honeywell thermostats from each family. Find your model, then read the notes for it below. Honeywell also keeps its own reset table for the Wi-Fi models.
| Model | Model number | Factory reset |
|---|---|---|
| T5, T5+, T6 Pro Smart | RCHT8610WF, RCHT8612WF, TH6220WF2, TH6320WF2 | Hold Menu > Reset > Factory Reset |
| T9 | RCHT9510WF, RCHT9610WF | Menu > Advanced Setup > Reset > Factory Reset |
| T10, T10 Pro | THX321WF | Menu > Installer Options (needs the Date Code) > Reset > Factory Reset |
| X7S, X8S | Touchscreen X-series | Menu > Advanced setup > Reset > Factory Reset |
| Smart Wi-Fi 9000 | RTH9580WF, RTH9585WF | Menu > Preferences > Restore Factory Defaults |
| Wi-Fi touchscreen 8000 | RTH8580WF, RTH8500WF | System setup, function 0710 set to 1 |
| Wi-Fi 6000 | RTH6580WF | Installer setup, function 90 set to 1 |
| Round Smart (Lyric Round) | TH8732WFH | Hold the cloud icon > Reset |
| T4 Pro, T6 Pro (without Wi-Fi) | TH4110U, TH6210U and similar | Not available: restart only |
| X2S, X2P, X1N | RTH2CWF and similar | Not available: restart only |
| RTH2300, RTH221 | RTH2300B, RTH221B | Not available: restart only |
T5, T5+ and T6 Pro Smart
These three use the same menu:
- Press and hold the Menu button until the menu changes.
- Press the right arrow until you see Reset, then select it.
- Press the arrow until you see Factory Reset, then select it.
The same Reset menu has WiFi, Schedule and HomeKit Reset, so you can choose a smaller reset instead. You can also reset the Wi-Fi from the Resideo app: open the thermostat, tap the settings icon and choose Reset WiFi.
T9 and T10
On a T9, press the Menu icon, scroll down to Advanced Setup, select Reset and then Factory Reset. Schedule Reset and HomeKit Reset are in the same place. To change the Wi-Fi network, go to Menu, then WiFi, then Change Network.
The T10 protects its reset menu with a code:
- Press the Menu icon and open Thermostat Information.
- Write down the Date Code.
- Go back, open Installer Options and enter the Date Code.
- Select Reset, then Factory Reset.
X7S and X8S
On Honeywell’s current touchscreen models, touch the Menu icon at the bottom left of the screen and select Advanced setup, then Reset. You’ll see five options:
- Reset Schedule
- Delete all Devices (it removes the wireless room sensors)
- Reset Matter
- Reset WiFi (it removes the thermostat from your network)
- Factory Reset
Honeywell says the factory reset returns the thermostat to the state it was in before installation.
Older Wi-Fi Models
These are the steps if you’re wondering how to reset Honeywell Home thermostats from a few years ago:
- Smart Wi-Fi 9000 (color touchscreen): press Menu, select Preferences, press Restore Factory Defaults and confirm with Yes.
- Wi-Fi touchscreen 8000 series: press System, then press and hold the blank button in the center of the bottom row for about five seconds. Change the number on the left to 0710 and the number on the right to 1, then press Done.
- Wi-Fi 6000 series: press and hold the up arrow and the Fan button until the screen changes. Set the number on the left to 90 and the number on the right to 1, then press Done.
- Round Smart (Lyric Round): press and hold the cloud icon, then scroll to Reset and select it.
ProSeries and Other Models Without a Factory Reset
If you want to know how to reset Honeywell ProSeries thermostats (the Pro models that HVAC contractors install), it depends on Wi-Fi. The T6 Pro Smart is a Wi-Fi model and uses the T5 steps above. If you’re not sure which T6 Pro you have, our Honeywell T6 Pro review lists every model. The T4 Pro and T6 Pro without Wi-Fi are different: their manuals don’t include a factory reset. Their advanced menu only has the installer setup and a system test.
The same is true for the X2S, X2P and X1N, and for basic battery models like the RTH2300 and RTH221. On all of these, you have two options:
- Restart it, as described above.
- Change the settings one by one in the installer setup. On the T1 Pro, T4 Pro and T6 Pro, press and hold the center (Menu) button and the + button for three to five seconds. On the X2S, X2P and X1N, press and hold the bottom left button and the up arrow for five seconds. The manual for your model lists every setting and its factory default.
There are two exceptions. On the RTH2300, you can restore the default schedule: press and hold the up and down buttons for about five seconds to open the system setup, then set function 40 to 1. And the newer FocusPRO P200 and S200 do have a reset menu: press and hold the bottom left button and the up arrow for five seconds, then choose RSET.
After a Factory Reset
It only takes a minute to factory reset Honeywell thermostats. The work comes afterwards, because the thermostat behaves like a new one and you have to set it up again:
- Go through the setup. Answer the questions about your system type using your photo of the wires. If you’re not sure about an answer, our guide on how to install a smart thermostat explains this part.
- Connect it to the app again. Add it as a new device in the app you used before (Resideo, First Alert or Total Connect Comfort).
- Set your schedule again, or keep the default one. Our guide on how to program a Honeywell thermostat has the steps for each model.
If you’re moving out or selling the thermostat, delete it from your account too. Otherwise, the next owner may not be able to register it. In the Resideo app, open the thermostat, tap the settings icon, select Thermostat Configuration and then Delete Thermostat. In the First Alert app, select the thermostat, tap the settings icon and choose Delete Device.
If you bought a home and the thermostat is still registered to the previous owner, Honeywell says to contact Resideo Customer Care.
If a Reset Doesn’t Fix It
A locked screen is one problem that a reset isn’t made for. On the T6 Pro, press the center button and enter the password 1234 to unlock the keypad. On the X8S, the screen lock is under Menu. Our guide on how to unlock a Honeywell thermostat has the steps and codes for every model. Because that password is easy to find, a keypad lock only stops accidental changes: our guide to the best thermostat lock boxes and locking thermostats covers stronger options.
If the screen is blank, or the heating or cooling doesn’t start, a reset won’t help much either. The cause is usually power, a setting or the compressor delay, and our Honeywell thermostat troubleshooting guide covers each one. For a flashing “Cool On” or “Heat On”, see our guide to Honeywell Cool On flashing.
If the thermostat still doesn’t work properly after a factory reset and a correct setup, it may be time to replace it. Our guide to the best Honeywell thermostats covers the current models.
The Bottom Line
That’s how to reset Honeywell thermostats without losing more than you need to. Start with a restart: it works on every model and keeps your settings. If you need more, use the smallest reset that solves the problem (Wi-Fi, schedule or HomeKit) before you choose the factory reset. And if your model doesn’t have Wi-Fi, don’t look for a factory reset, because it probably doesn’t have one. Restart it and correct the settings in the installer setup.
Where is the reset button on a Honeywell thermostat?
Honeywell thermostats don’t have a reset button. You restart one by pulling it off the wall plate (and taking out the batteries) for 30 seconds. A factory reset is done from the menu on the screen, and the steps depend on the model.
How do I factory reset a Honeywell T6 Pro Smart thermostat?
Press and hold the Menu button, press the arrow until you see Reset and select it, then go to Factory Reset and select it. The T5 and T5+ use the same steps. A factory reset erases the schedule, the Wi-Fi connection and the system setup.
Will I lose my settings if I take the batteries out of my Honeywell thermostat?
No. Honeywell’s manuals say settings are permanently stored in memory and don’t need battery power. On some models you may need to set the clock again if the batteries are out for more than two minutes.
How do I reset the Wi-Fi on a Honeywell thermostat?
On a T5, T5+ or T6 Pro Smart, press and hold Menu, go to Reset and choose WiFi, or use Reset WiFi in the Resideo app. On a T9 or T10, go to Menu, then WiFi, then Change Network. On an X7S or X8S, go to Menu, Advanced setup, Reset and choose Reset WiFi.
Does a Honeywell T4 Pro or T6 Pro without Wi-Fi have a factory reset?
Honeywell’s manuals for these models don’t include one. You can restart the thermostat, and you can change each setting in the installer setup, which opens when you press and hold the center button and the + button for a few seconds.